2024 Audi Q3 - WA1EECF3XR1030005

Confirmed facts

Source: from the sale record.

Visible condition, area by area

• Front bumper cover and grilleheavy Removed from the car. The detached cover is broken and torn, and the grille surround and trim pieces lie on the ground. (photo 1, 3, 5, 12)
• Lower front bars / bracketsheavy A long lower bar or trim strip hangs down to the ground with loose wiring, while a black lower bar across the front is still attached. Reinforcement-type pieces are also among the detached parts. (photo 1, 3, 5, 12)
• Left front fendermoderate Creased and scraped with paint damage above the wheel, and the front of the wheel-arch liner looks loose. The hood-to-fender gap looks uneven. (photo 3)
• Headlights and mountsmoderate Both headlights are present and their lenses look intact, but the mounting areas around them are exposed and some brackets look broken or disturbed. (photo 1, 3, 5, 11)
• Hoodlight Looks largely straight, with a possibly uneven gap at the left front corner. (photo 1, 3, 5)
• Radiator / condensernone visible Fully exposed with the bumper removed. No obvious crushing is visible. A dark wet patch is on the ground under the front; its source cannot be told from the photos. (photo 1, 11)
• Right front fenderlight Small paint chips at the lower edge near the wheel arch. (photo 4, 5)
• Interior / airbagsnone visible Dashboard, steering wheel and seats look intact, with a few light marks on the rear seats. No deployed airbags are visible. (photo 6, 10, 13, 14)
• Sides and rearnone visible Doors, rear quarters, tailgate and rear bumper look undamaged. (photo 2, 4, 9)

Visual observation, not a confirmed fact.

What a buyer or inspector should check

• Pressure-test the radiator, A/C condenser and cooling fan. The whole pack is exposed in photos 1 and 11, and a dark wet patch is on the ground under the front in photo 1.
• Check the front frame rails and bumper-beam mounting points for bending. A lower bar hangs down in photo 1 and reinforcement-type pieces are among the detached parts in photo 12.
• Check the left front fender, inner apron, wheel-arch liner and hood alignment. The fender is creased and the gap looks uneven in photo 3.
• Check the headlight mounts, headlight aim and the front sensor and camera wiring. Brackets around the headlights look broken and wiring hangs free in photos 1, 3 and 11.
• Check left front suspension and wheel alignment, since the fender damage sits directly over the left front wheel in photo 3.
• Pull the title and vehicle history report to confirm title status and any prior damage records.

What the photos cannot show

• Whether the frame or unibody is bent behind the bumper area
• Whether the radiator, condenser or other front components are leaking or internally damaged
• Condition and calibration of front driver-assist sensors and radar
• Mechanical and electrical condition (engine, transmission, electronics)
• Whether any airbag or restraint system faults are stored
• Whether the odometer reading is accurate beyond what the display shows
• Flood or water exposure

What the damage type means

Front end

The vehicle was damaged at the front: bumper, grille, headlights, hood, and possibly the radiator, airbags or front structure.

This is what the sale record reported. The real condition can only be confirmed by an inspection.

Record timeline

• 24 Sep 2026Added to Auction Cars Blog

How this photo check was made

Each of the 14 photos was examined one by one and described in plain words; 9 areas of the vehicle were rated by what is visible. The recorded damage and mileage come from the sale record and are kept separate from what the photos show. Nothing is estimated from the photos.